3 – Preparation
Connecting to a camera (CA-XLR2d-AN)
1.
Loosen the tightening dial (
l
).
2.
With the unit oriented correctly, mount the connector part
to the camera accessory shoe, sliding it all the way in.
3.
Using the tightening dial (
l
), attach this unit to the
connected device securely.
4.
Use the included 3.5mm (1/8”) stereo mini cable to connect
the OUTPUT jack (
t
) of this unit with the camera input jack.
ATTENTION
i
Do not use with an analog connection to a camera when
set to . If used with the /− buttons (
y
) near
maximum level, excessive input could occur depending on
the camera input specifications, possibly resulting in damage
to the connected devices.
i
Power will not be supplied if the accessory shoe attachment
adapter that is connected is not compatible with the camera
or attachment is incomplete. To check, refer to the list of
cameras that have been confirmed for operation on the
TASCAM website (https://tascam.jp/int/product/ca-xlr2d/
docs).
i
When not connected to a camera, attach the connector
cover to the unit. Failure to do so could result in this unit
malfunctioning due to the ingress of foreign matter or
connector damage, for example.
5.
Set the OUTPUT switch (
r
) to .
TASCAM CA-XLR2d
11
