TASCAM BD-MP1
31
4. Use the
j
/
k
cursor buttons to select a file and press
the
7
button to start playback.
When a file is selected, the following information
appears on the right side of the monitor.
i
Thumbnails of image files
i
Various information for audio and video files
Playing USB flash drive/SD cards playlists
To play playlists with these media, connect them to the USB
port* or SD card slot on the front of the unit.
* Another USB port is on the back of the unit.
While the medium is being read, "
LOAD
" appears on the
display, followed by one of the items below when reading
completes.
o
USB flash drive:
USB
o
SD card:
SD
NOTE
Media files in playlists will be played back in the order that
they were selected.
Adding files to a playlist
1. Select Media on the HOME screen and press the ENTER
button.
Media icons will appear. Use the
j
/
k
cursor buttons to
select an SD/USB icon and press the ENTER button.
2. Opening the selected icon will show the following folders.
…:
Top folder
Photo:
Photo folder
Music:
Audio folder
Video:
Video folder
AVCHD:
High-quality video folder
NOTE
Playlists can only include image, audio or video files.
A playlist cannot contain different types of files. (For example,
it cannot contain both image and video files.)
3. Select the file to add to the playlist, and press the TITLE/
POP UP button to open a pop-up message.
4. Use the
j
/
k
cursor buttons to select "Add to playlist”,
and press the ENTER button to add the selected file to the
playlist.
o
When a file is selected, press the
;
cursor button to add a
check mark before the file name, selecting it.
Select a file again and press the
;
cursor button to remove
its check mark.
o
Add check marks to the necessary files, and press the
TITLE/POP UP button to open a pop-up message.
Use the
j
/
k
cursor buttons to select "Add to playlist”,
and press the ENTER button to add the selected file to the
playlist.
o
In addition, check marks can be added to all files in the
folder by selecting "Select all” in the pop-up and pressing
the ENTER button in step 3.
