TASCAM BD-MP1
21
BD-LIVE Connection
Permitted/Partially Permitted/
Prohibited
Select the access level for BD-Live contents on the Internet.
o
Permitted: All contents can be accessed.
o
Partially Permitted: Specific contents can be accessed.
o
Prohibited: BD-Live contents will be blocked.
Proxy Settings
Disable/Enable
Set whether or not to connect this unit to the Internet through a
proxy server.
o
Disable: Do not use a proxy server.
o
Enable: A proxy host and proxy port can be set.
* “Wireless” connection can only be used if a USB-wireless LAN adapters has been connected to the unit.
A USB-wireless LAN adapter is not included with this unit. (see "Network connection overview" on page 36)
** If USB flash drives have been connected to both the front and back USB ports, the one first recognized by the unit will be used for
external memory
Do not disconnect the USB flash drive when the BD-Live function is in use. The USB flash drive should use the FAT32 file format.
Display Settings
TV
Function
Options
Explanation
TV Screen
p
16:9 Full
p
16:9 Normal
p
4:3 Pan & Scan
p
4:3 Letterbox
Use to set the display aspect ratio.
Resolution
p
Auto
p
480I/576I
p
480P/576P
p
720P
p
1080I
p
1080P
Use to set the image resolution.
p
If Auto is selected, this unit will detect the optimal resolution for
the monitor or TV. In this case, a message confirming the saving
of the selection will appear. Select "OK" as necessary.
TV System
NTSC/PAL/Multi
Select the broadcast format* of the device connected to the unit.
Color Space
p
RGB
p
YCbCr
p
YCbCr422
p
Full RGB
Select the HDMI output color space.
HDMI Deep Color
30 bits/36 bits/48 bits/Off
Select the HDMI output deep color mode.**
HDMI 1080P 24Hz
On/Off
Turn frame rate conversion on/off for 1080P Blu-ray discs that play
back at 24 Hz.
HDMI 3D
Auto/Off
p
When Auto is selected, the 3D signal will automatically be
output when 3D video is played.
p
When Off is selected, 3D signals will not be output.
* When in a region that supports both NTSC and PAL, select “Multi”.
** For this function to work properly, the TV or monitor must support HDMI version 1.3 or later.
Video Process
Function
Options
Explanation
Video Adjustments
More…
Adjust the brightness, contrast, hue and saturation output from this
unit to the TV or monitor.
p
Brightness/Contrast/Hue/Saturation
Sharpness
High/Normal/Low
Set the sharpness to High/Normal/Low for images output from
this unit to the TV or monitor.
