Tarter RT104BL Operation And Assembly Manual Download Page 31

31

WARRANTY

MANUFACTURER'S LIMITED WARRANTY

Tarter Farm and Ranch Equipment warrants to the original purchaser that the purchased product is free from defects 
in material and workmanship for a period of one (1) year commencing on the date of original purchase, as evidenced by 
the original receipt, and will, at its option, repair, replace or issue credit for any product or part found to be defective.

This limited warranty shall only apply if this product has been operated and maintained in accordance with the 
Operator’s Manual furnished with the product, and has not been subject to misuse, abuse, commercial or industrial 
use, neglect, improper maintenance, alteration, or accident or which has been used for a purpose for which the product 
was not designed. Damage resulting from the installation or use of any part, accessory, or attachment not approved by 
Tarter Farm and Ranch Equipment, for use with the product covered by the Operator’s Manual, shall void the warranty 
as to any resulting damage.

This limited warranty is extended solely to the original purchaser of the product. Should the original purchaser sell or 
otherwise transfer this product to a third party, this warranty does not transfer to the third party in any manner.

HOW TO MAKE A CLAIM:

To obtain warranty service through a local authorized retailer, a customer must present the following within thirty (30) 
days of implement failure:
1. 

Proof of purchase within one (1) year of purchase date.

2. 

Photographs of or return of the actual product in question.

3. 

Photograph of UPC label.

After receipt of the above information, if the product is alleged to be defective, Tarter Farm and Ranch Equipment will 
process the claim and issue a Return Manufacturers Authorization number (RMA). Once an RMA number is issued, 
Tarter Farm and Ranch Equipment will pick up the product from the authorized retailer and return to its facility for 
inspection. Tarter Farm and Ranch Equipment will replace, repair, or issue credit for any product after examination 
which is determined to be defective due to defects in material and workmanship.

For additional Warranty questions, please call 1-800-RED-GATE or email [email protected] for assistance.

Summary of Contents for RT104BL



































Reviews: