22
8. Slide gearbox to left approximately 5”. Side hex shaft
should drop out of gearbox on right hand side.
9. Slide gearbox forward and out.
10. Remove vent plug from top of gear box.
11. Remove flat plug from bottom of gear box. Switch the
vent plug from top of gearbox to bottom and flat plug
from bottom to top.
1. Detach tiller from tractor.
2. Make sure tiller is securely blocked and level.
3. Remove PTO shaft from tiller.
4. The tines must be reversed on the tiller before reverse
operation.
5. Remove four (4) bolts in each end of tine carrier
6. Carefully remove tine bar assembly and turn 180° and
place in front of the tiller. Before reattaching the tines,
remove gearbox.
7. Loosen and remove a
total of (6) bolts, (2) on top of gear box and (4)
underneath.
REVERSING TILLER TINE DIRECTION
CAUTION: The bar assembly is heavy and
contains sharp edges. Handle carefully!
CAUTION: Gearbox is extremely heavy.
Handle with care.
NOTE:
If hex shaft does not come out of
gearbox, simply slide hex shaft out of side
gearbox first and then remove it from main
gearbox.
