Targus WIRELESS User Manual Download

Page: 3 / 8

Targus Wireless Numeric Keypad

Installing the Batteries

USB receiver

Battery compartment
cover

On/Off switch

Reset button

1. Remove the battery cover from the back of the keypad.

2. Insert the supplied battery, making sure that the positive (+) and

negative (-) ends of each battery match the polarity indicators inside

the battery compartment.

3. Slide the battery cover back into position until it “clicks” firmly into place.

Summary of Contents for WIRELESS

Page 1: ...User Guide ...

Page 2: ...s designed with a storable USB receiver providing ease of use when travelling System Requirements Hardware USB port Operating System Microsoft Windows 2000 Microsoft Windows XP Microsoft Windows Vista Microsoft Windows 7 Mac OS X 10 4 or later Contents Targus Wireless Numeric Keypad 1 x AAA Battery 1 x USB Receiver User Guide ...

Page 3: ...witch Reset button 1 Remove the battery cover from the back of the keypad 2 Insert the supplied battery making sure that the positive and negative ends of each battery match the polarity indicators inside the battery compartment 3 Slide the battery cover back into position until it clicks firmly into place ...

Page 4: ... computer Connecting to Your Computer 1 Remove the USB receiver from the back of the keypad 2 Plug the USB receiver into an available USB port on your computer 3 Power on the keypad by using the On Off switch located on the back of the keypad NOTE WHEN THERE IS COMMUNICATION BETWEEN THE KEYPAD AND THE RECEIVER THE LED ON THE RECEIVER WILL FLASH ...