Targus Laser Presentation Remote
6
Targus Laser Presentation Remote
7
Using Your Remote
PC PowerPoint
®
Mac KeyNote
®
Mac PowerPoint
®
Before using the remote, please select your computer type and preferred
presentation software. Locate the switch inside the battery compartment
as shown.
NOTE: SELECT “PC POWERPOINT” IF YOU USE A COMPUTER MADE BY:
HP/COMPAQ, DELL, TOSHIBA, GATEWAY, PANASONIC, FUJITSU, SONY,
IBM/LENOVO, ACER, ASUS, ETC.
This remote is a plug and play device. It will automatically operate when the
USB receiver is connected to the computer. Plug the mini USB receiver into
any available USB port on your computer.
Turn on the remote by pressing and holding the On/Off power button for 3
seconds.