5
INSTALLING TRANSMITTERS
You can use the Transmitter as a doorbell that
activates when the button is pressed or to notify you
when the magnetic contact is separated.
Installing as a Doorbell
1. Use a drill and two screws (included) to mount the
Transmitter bracket. Make sure that the arrow on the
bracket is facing up.
2. If you’re mounting your Transmitter outside, push the
silicone plugs into the screw holes to waterproof the
casing.
3. Slide the Transmitter down onto the bracket.
Door / Window Mounting
1. Choose mounting locations where the magnetic
contact can be 10 mm or less from the push button.
2. Use your fingernail or a flathead screwdriver to pry
open the magnetic contact’s cover.
3. Mount the magnetic contact with a drill and two
screws (included), then snap the cover back on.
4. Mount the Transmitter bracket with a drill and two
screws (included). Make sure that the arrow on the
bracket is facing up.
5. If you’re mounting your Transmitter outdoors, push
the silicone plugs into the push button’s screw holes
to waterproof the casing.
6. Slide the Transmitter down onto the bracket.
INST
ALLA
TION.
