4
SENSORS TO RECEIVER
Be careful not to activate your Sensor until you have
configured your Receiver and selected a tune.
Configuring your Transmitter to your Receiver
1. Place your Receiver and Universal Transmitter beside
each other.
2. On the Receiver, press and hold the
MODE
button for
3 seconds until the lights on top flash.
3. There are 16 different tunes to select from. Press
the
SOUND
button until you have found a tune you
prefer.
4. Once you have found your preferred tune, activate the
Transmitter by pressing the button on the Transmitter.
A small beep will sound on the Receiver to confirm
the configuration.
5. Once configured, press and hold the
MODE
button
on the Receiver until the lights stop flashing.
6. To test the Kit, activate the Transmitter by pushing the
button again or by separating the two pieces, which
should sound on your Receiver.
