background image

PREFACE

You have just purchased a TARGET LaserTrack and are now
the owner of a very advanced Class 1 laser remote control
system which can be used for various actions. The system
is unique because it allows you to open your automated
gate, garage door or turn on or off the outdoor lighting
fully automatically, i.e. without pressing a button, at a
distance equal to that of radiographic remote control sys-
tems. The unique code of your vehicle is automatically
recognized by the basic transponder(s) as soon as you are
within range through the patented “trigger and reply”
tech-
nology. The Class 1 laser technology used is safe, reliable
and is more user-friendly than conventional remote 
control systems. 
The automotive industry has also discovered the advan-
tages of laser technology. Nissan already introduced an
“adaptive cruise control system” which automatically
determines the distance to the cars in front of it and
which adjusts the speed accordingly if required. Laser
technology is also widely applied for distance measuring
systems that can be mounted in the vehicles after these
have left the factory. 

We believe our system can increase the comfort of
driving and wish you many happy years using your
TARGET LaserTrack.
We recommend you read this manual thoroughly in
order to get fully acquainted with the system.   

Target Automotive BV

ENGLISH

4

Summary of Contents for LaserTrack LT400















Reviews: