background image

Conditions of Guarantee

1. The manufacturer guarantees the reliability of the

system. The guarantee is valid for a term of 12 months
for what concerns manufacturing and/or material
failure and the following (excluding all other): 
- If and when the system is used for the purpose
for which it was designed and is mounted and used
in the correct manner and under circumstances that
can be deemed to be normal, and all this according
to the regulations and/or instructions of the manu-
facturer. 
- If and when the buyer has met all his responsibili-
ties and the buyer informs the dealer at once, and
no later than one week, after detecting the failure
or fault and the dealer finds the system in the state
in which the system was at the moment the fault
or failure was discovered.

2. The guarantee is valid if and when the buyer has

filled in the warranty registration form and mailed
it within two weeks of the purchase date.

3. The guarantee is not valid if and when any work

has been or is carried out on the system within 
the guarantee period without the prior written
permission of the manufacturer.

4. The guarantee claim will be processed after the

defect system or the part concerned has been

shown to the dealer. The buyer should also provide
the warranty registration form with the stamp of the
dealer and the serial number of the system as well as
the original proof of purchase or cash register slip.

5. To meet the obligations under the guarantee the

manufacturer is only legally entitled and obliged to
deliver or repair the system or parts thereof con-
cerned, at the discretion of the manufacturer.

6. The manufacturer is not bound by the guarantee to

carry out or pay for the disassembling or installing
of the system or parts thereof. Postage and handling
costs are at the expense of the buyer.

7. The manufacturer is never liable for any damage to

persons or goods caused by the malfunction or not
functioning of the system.

8. Only Dutch law is applicable to deliveries of the

system.

ENGLISH

14

Summary of Contents for LaserTrack LT400















Reviews: