step 5: attach top panel
(H1)
x 6
wooden dowel
(H2)
x 8
cam bolt
(H3)
x 8
cam
5.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
5.2. Screw-In cam bolts must be screwed down flush.
5.3. Refer to page 6 for instructions on how to use the cam lock system.
5.4. Do not over tighten bolts.
11
front edge
(H2)
x 8
cam bolt
(H3)
x 8
cam
Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
Screw-In cam bolts must be screwed down flush.
Refer to page 6 for instructions on how to use the cam lock system.
