step 3: attach upper front and rear rails/bottom panel to left side panel
(H1)
x 4
wooden dowel
(H2)
x 4
cam bolt
(H3)
x 4
cam
3.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
3.2. Screw-In cam bolts must be screwed down flush.
3.3. Refer to page 6 for instructions on how to use the cam lock system.
3.4. Do not over tighten bolts.
9
(H1)
x 4
wooden dowel
(H2)
x 4
cam bolt
(H3)
x 4
cam
Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
Screw-In cam bolts must be screwed down flush.
Refer to page 6 for instructions on how to use the cam lock system.
