8.1. Align and attach the drawer box supports (F) between the back upper stretcher (E) and the side frames (B and C) with four 13mm bolts (H1). Make sure that
the mounting holes on the drawer box supports (F) overlap the threaded inserts underneath the drawer box properly.
step 8: attach drawer box supports
(H4) x 1
hex wrench
NOTE:
DO NOT fully tighten all bolts
until you finish assembling all parts.
Once assembled, go back and fully
tighten all bolts. This will make the
assembly easier.
(H1) x 4
1/4”
x 13mm bolt
F
H1
C
B
C
B
/
E
E
F
H1
F
12
