step 10: attach tipping restraint hardware
Tools required: Phillips screwdriver, stud finder, tape measure, pencil, power drill and
1/8”
drill bit.
10.1. Adjust the pre
-
attached floor levelers to level the unit against a wall.
10.2. Follow the instructions printed on plastic bag containing tipping restraint hardware to attach the tip
-
over restraint between the unit and the wall.
NOTE:
You must use this tipping restraint to attach this unit to the wall, to prevent accidents and / or injures.
Floor leveler
Metal bracket
Long screw
Wooden stud
Short screw
Wall
Wall
(H5) x 1
tipping restraint hardware kit
(inside plasticbag)
Connector
H5
14
