Targa lupilu LBP 864 A1, Operating Instructions And Safety Instructions

Page: 11 / 38

Lupilu LBP 864 A1
English - 9
range of the radio frequency signals depends on environmental conditions. If data is transmitted via a
wireless connection, it can also be received by unauthorised parties. Targa GmbH is not liable for any
interference caused to RF or TV signals through unauthorised modification to this device. Furthermore,
Targa accepts no liability for replacing any devices that have not been specifically approved by Targa
GmbH. The user is solely responsible and liable for remedying any interference caused by such
unauthorised modification of this device and for replacing appliances.
WARNING! Repairs
Repairs are required when this device has been damaged in any way, for example when liquid has
entered the product, when the product has been exposed to rain or moisture, when the product does not
work normally or if the product has been dropped. If smoke, unusual noises or smells are noticed, power
off the device immediately, disconnect the power adapter from the mains and remove the rechargeable
or conventional batteries. If this occurs, do not continue to use the device and have it checked out by an
expert. All repair work must be carried out by qualified personnel. Never open the housing of the
device, or the accessories. You can only open the cover of the battery compartment (6, 14) in order to
insert or remove batteries.
WARNING! Make sure that:
- no direct heat sources (e.g. radiators) affect the device
- no direct sunlight or bright artificial light reaches the device
- contact with spray and dripping water and abrasive liquids is avoided and the device is never
operated near water, and, most importantly, is never immersed (do not place any objects filled with
liquids such as vases or drinks on or near the device)
- there is clearance of at least one metre from radio frequency and magnetic sources (e.g. TV,
speakers, mobile phones, etc.) to avoid any malfunction. In case of malfunction, install the device at
a different place.
- never place the device in the immediate vicinity of magnetic fields (e.g. loudspeakers)
- do not place any fire sources (e.g. burning candles) on or near the device
- no foreign bodies can penetrate into the device
- the device is not exposed to any extreme temperature fluctuations as this can cause moisture
through condensation and cause short-circuits. If the device has been exposed to strong temperature
variations, wait for it to reach the ambient temperature before switching it on (about 2 hours)
- the device should not be subjected to excessive shocks and vibrations
5.1 Operating environment
Position the device on a stable, flat surface and do not place any objects on the device. The device is
not for use in rooms with a high temperature or humidity (e.g. bathrooms), and must be kept free of dust.
Operating temperature and operating humidity: 5°C to 40°C, max. 90% rel. humidity.