Targa lupilu LBP 864 A1, Operating Instructions And Safety Instructions, Page: 12 / 38

Lupilu LBP 864 A1
10 - English
Copyright
All the contents of these operating instructions are protected by copyright and provided to the reader for
information only. Copying data and information without the prior explicit written consent of the author is
strictly forbidden. This also applies to any commercial use of the contents and information. All texts and
diagrams are up-to-date as of the date of printing. Subject to change without notice.
6. Before you start
Unpack all the devices and use the package contents checklist on page 4 to verify that you have
received all items listed. Next remove all package material. If you find anything missing or damaged,
please contact Customer Service (see “Warranty information” on page 16).
DANGER! There is a risk of suffocation.
Keep the packaging material away from children and dispose of appropriately.
You can power your baby monitor using conventional batteries, rechargeable batteries or using the
power adapters provided. If you use rechargeable batteries, you can charge them directly in the baby
monitor by connecting it to the mains power via the power adapters.
6.1 Inserting the batteries
No rechargeable or conventional batteries are provided with the baby monitor. If you do
not wish to power the baby monitor, i.e. the parent receiver unit (A) or the baby
transmitter unit (B) from the mains, you need to buy batteries.
WARNING!
If you wish to use rechargeable or conventional batteries, make sure that you only use
AAA NiMH batteries with 1.2 V and 600 mAh. (You can also use NiMH batteries with
higher capacity, but this does extend the charging time.) If using rechargeable or
conventional batteries with a different voltage or chemical composition (e.g. NiCd), there
is a risk of overheating and explosion!
DANGER! When powering the baby monitor with the power adapter, no conventional
(non-rechargeable) batteries must be inserted. Otherwise there is a risk of explosion as
well as a risk of injury and damage to property.
First, insert the batteries into the parent receiver unit (A) and the baby transmitter unit (B) (see diagram
below).