Taking still pictures:
1. Press the Mode button to choose your camera mode.
The default mode is single shot mode which the most
commonly used mode
。
2. Aim at your subject through the binoculars.
3. Press the shutter button to capture what you see. A
beep sound will confirm that you have taken a photo
and the LCD photo counter will increase by one. While
capture is start, please hold the “
clairvoyance
” stably
unit sounded again.
4. If the camera memory is full, the text ”FULL” is shown
no the LCD panel and with an alarm sound
。
Self Timer – Taking still pictures:
The self – timer allows you to take a picture and have 10
seconds delay before taking a picture.
1. Press the mode button until the self – timer icon is
flashing and then press the Confirm button to enter
the self – timer mode.
2. Press and release the Shutter/Confirm button. The
buzzer keeps beeping for 10 seconds before taking a
photo.
3. You may stop the self – timer countdown after is
started be pressing the shutter button once.
Taking a video
（
Only works by SD Memory card
）
1. Press the Mode button to choose the video mode.
2. Press and hold the shutter button to capture video
and release the Shutter button only when you wish to
end the video capture
。
3. The video clip is stored in AVI format and the photo
counter will increase by one
。
Erasing/Deleting Pictures
:
As with still pictures, you could have the ability to erase the
last or all of your pictures
。
Run on PC cam mode:
Press the shutter button while unit is connected with PC
until the “PC” show on the status LCD. Now unit is works on
the PC cam mode success.
Please Note
: When the camera memory is full the LCD will
display Full and you cannot take any more
pictures by using the EAL – Erase all or E01
–Erase Last Picture option.
Downloading Photos to Your Computer:
When your
“Clairvoyance”
is connected to your
computer
，
you may see a Removable disk drive which is
the photo storage of your
“Clairvoyance”
you may simply
copy the files from the removable disk to your computer.
