Important : Do not connect the “Clairvoyance” to
your computer before installing the software from
the CD-ROM attached.
Installation the “Clairvoyance” software to your
computer
:
1. Please install the CD-ROM before connecting your
Clairvoyance
computer.
2. Insert the
Clairvoyance
CD-ROM into your CD-ROM
driver.
3. Choose the “install Ulead photo Explorer7.0” button
and step through to install the photo editing software
included.
4. Choose the ”Install Camera Driver” button to install the
camera driver.
5. Choose the “exit” when the software installation has
completed the next section.
6. Keep the installation CD-ROM inside the CD-ROM
drive until you complete the next section.
Remark
：
If your installation CD-ROM did not run
automatically, please click the “start” button
on the windows tool bar and choose ”Run”,
and then browse the CD-ROM drive and run
the “setup.exe” file.
Connecting the Clairvoyance to the computer
USB port
1. Connect the USB cable(B type) to your computer’s
USB port as below drawing.
2. Connect the USB cable (A TYPE) to your
Clairvoyance as below drawing.
3. Your computer will automatically recognize the new
device.
Using Photo Editing Software
：
See the help file of the Ulead phptp Explorer 7.0 Platinum
program for detailed usage instructions.
