4.
Focusing the Binoculars:
1. Keep only your left eye open and look through the left
lens. Turn the central focus adjustment knot until you
see crystal clear image through your left eye.
2. Close your left eye and look through your right eye
through the right lens. turn the right lens adjustor to
focus.
3. When done, both your binocular lenses would be in
focus.
5. Taking Photos
Battery installation:
Before using your “
Clairvoyance
”, you need to load the
batteries as below
：
1. Pull down with your thumb on the top of battery
compartment
。
2. Insert
2
AAA alkaline batteries into the “
Clairvoyance
”
according to the engraving battery marks.
3. Press Power/Mode button about 3 second, the
camera will be turned on (Default setting)
4. Insert the SD card to SD card slot, if SD card is not
presented, a warning tone will sounded 10 seconds
then power off automatically.
5. If the SD card is protected, the
PrT
will be shown.
Please un-protect the SD card then star to capture.
Battery Status indicator:
The battery status indicator is a three-segments indicator
and the meaning is explained briefly below.
When the battery is full, three segments are
shown, the voltage is about 3 volts
.
After a period of operation, the voltage drop down
to half, the buzzer sounds a thrilling tone and the
left part of the battery icon disappears.
。
When the battery is almost exhausted, the battery
icon displays only the right part of a short period
and the camera will be power off automatically
。
Attention: Clairvoyance
will be auto power off with a
key tone after certain time if not in use and
Clairvoyance
will be power on by pressing power/mode button with a key
tone.
Clairvoyance
performs
best under good lighting conditions,
Please remember that to keep focus 15 meter to infinity to
take picture and
do not view the sun directly.
