Targa 106751, User Manual And Service Manual

Page: 182 / 189

CR 1.0 A1
180 - English
Connectors and sockets
Viewing recordings on a television
Any recordings that you can view on the Dashboard Camera display can also be played on a
normal television. The television set needs to have an appropriate HDMI input.
A HDMI cable with a mini-HDMI connector (not supplied) will also be required. The HDMI cable
provides digital images and sound and therefore optimum quality. The HDMI output (3) can be
found under the protective cover (4).
While the Dashboard Camera is connected to the TV via the HDMI cable, video
recording and still image capture are not available. It is only possible to play already-
recorded content.
Simply operate the device as usual. For instance, enable Slide Show to have all images displayed
automatically (see also "Slide Show" on page 179).
Connecting the HDMI cable
1. Please make sure that the Dashboard Camera is powered off.
2. Open the protective cover (4) and insert the small end of the optional HDMI cable into the
HDMI output (3) on the Dashboard Camera (see also "Overview" on page 153).
3. Plug the larger connector of the HDMI cable into the HDMI receptacle of your TV set.
4. Select the HDMI signal source corresponding to the above input connectors on your TV set. If
necessary, read the User Manual of your TV set for more information on how to do this.
5. Switch on the Dashboard Camera using the On/Off button (14). The device display remains
off while the picture will be shown on the TV screen.
Further information can be found in the "Playback" section on page 166 and in "The playback
menus" section on page 178.
Transferring recordings to a computer
There are two ways of copying recordings from the Dashboard Camera to a computer.

by connecting the device to a computer via the USB cable

by inserting the SD memory card into a card reader.