SF-2200H Flame / Plasma CNC Cutting System Operating Manual
23
Section 8 Shape Library Function
8.1、Library Setting：
Under main menu, press F5 to enter Library Mode:
8.2、Shape Selection
SF-2200H presently provides 24 standard shapes（extendable upon request） Press direction button
【↑】
【↓】
【←】
【→】to move the curser, select desired shape and press ENTER to confirm.
8.3、Shape setting and nesting
After selecting shape parts on previous step, system would display shape’s parameters to users.
【
F1
】
: Hold the inside part when cutting
【
F2
】
e
: Hold the exterior part when cutting
【
F3
】
: Press
【
F3
】
, then the system will give you a hint to input a revolving angle. Press
【
ENTER
】
,
and then press
F6
to confirm.
【
F4
】
: Press the key
【
F4
】
to enter into the nesting mode and input the number of rows, columns and
图 7.1 Library Function
