background image

9

 

imitating  the  fabric  on  the  inside;  anti-dust  acrylic  coating;  fabric 
weight: 850g/m²; fabric thickness: 0.5mm; fracture toughness approx. 
250/250  DaN/5cm  (ISO  1421),  tear  resistance  approx.  25/20  DaN 
(DIN  53363);  2

nd

  fire  resistance  class  M2  (NFP  92-507);  allowed 

temperature changes: -30/+70˚C; 100% watertight.

 

Cleaning and care: water, light det soft cloth.

 

 

SOLTIS W96

 

1100 Dtex polyester with double-sided PVC coating; micro-perforated 
PVC cover; shiny coating. Weight 620g/m2, tensile strength 220/220 
daN/5cm  (EN  ISO  1421),  tear  resistance  25/20  daN  (DIN  53.363), 
thickness 0.56 mm, fire resistance: 1

st

 class (UNI 9177-87), 2

nd

 class 

M2 (NFP 92-507); 100 % watertight.

 

Cleaning and care: water, light det soft cloth.

 

 

SERGE 600 SOLAR

 

Fabric  coated  in  fiberglass  yarns,  composition:  34%  fiberglass,  48% 
PVC,  18%  laminate.  Weight  645g/m2.  The  fabric  blocks  sunrays  out 
but retains transparency - translucency 3%; fire resistance: 1

st

 class 

(UNI  9177-87),  2

nd

  class  M2  (NFP  92-507);  allowed  temperature 

changes: -30˚C/+70˚C, 100% watertight.

 

Cleaning and care: water, light det soft cloth.

 

 

3.5

 

Limitations of the fabrics

 

Watertightness - acrylic fabrics are not watertight. They contain microscopic, 
porous  holes  where  the  threads  cross.  External  impregnation  applied  on 
acrylic and polyester materials creates a protective layer against dirt, water, 
and oily substances. During rainfall water drops run down easily when the 
canopy is sloped. Weather and mechanical conditions gradually reduce the 
effectiveness 

of 

the 

impregnation.

 

 

Rot resistance - the canopy fabrics are usually made of synthetic materials, 
which do not contain any biodegradable substances. This, in turn, makes 
them  rot-proof.  The  accumulation  of  dirt  and  other  naturally  occurring 
substances on the fabric surface, coupled with moisture, may create very 
good conditions for fabric degradation. Folding of a damp fabric may have 
an additional negative effect on the condition of the fabric and may cause 
change in its color. It is important to let the fabric dry before folding it.

 

 

Creases – the cobweb effect: creases may form as a result of folding the 
fabric, the "wrinkle" effect may, particularly when exposed to light, become 
darker. This, however, does not affect the usability of the fabric and is not 

Summary of Contents for Cubic















Reviews: