6
3.2
Wind class
The canopy of the structure was subjected to FEM tests (Finite Element
Method), which resulted in determining the wind resistance in relation to
the width and extension
of the structure. The maximum pressure is 570
(N/m
2
), which represents the sum of the resistance of forces acting on the
structure, which in turn corresponds to the maximum wind speed of
110km/h – 11 in the Beaufort scale.
Fig. 3 List of wind classes – Tarasola Cubic
3.3
Electrical components for Tarasola Cubic
Tarasola cooperates with the best suppliers on the market in order to ensure
the highest level of offered products. Thanks to the electrical components
used in our products, we are offering a comprehensive product to our Clients
- the best on the market.
WARNING! Due to the complexity and specificity of the product,
installation shall be performed by qualified personnel. Any actions
inconsistent with the guidelines may cause a potential threat and
void the warranty.
ELECTRIC MOTOR.
A motor with a built-in radio receiver and an electric
limiter. Secure coding system. Simple programming and maneuvering. All
operations are controlled by the motor, and it works at low speed. Operation
via remote or local controller.
Installation remarks
The protection rating of a motor installed outside stands at IP 44. However,
if the switch shall be installed internally then its protection rating may drop
to IP 40. The voltage supplied to the motor must be 230 V. The wiring must
be insulated.
Motor connection diagram is presented below.
