Rated Power Consumption:
Protection System:
Weigth:
Maximum Supply Voltage:
Idle Consumption:
Minimum Supply Voltage:
Musical Consumption / @12.6VDC:
Dimensions (W x H x L):
4 OHMS:
Crossover
HPF (High Pass Filter):
Freq.:
Number of Channels:
Signal- to-noise Ratio:
1 OHM:
2 OHMS:
Frequency Response:
Output Impedance Range:
Boost:
Efficiency:
Input Impedance:
Output Power / @12.6VDC*
LPF (Low Pass Filter):
Input Sensitivity:
Technical features
12
Bass Boost:
1 Ohm ~ 2 Ohms
3000W RMS
2000W RMS
10Hz ~ 10KHz (-3dB)
10Hz ~ 90Hz (-12dB/8ª) Variable
90Hz ~ 10KHz (-12dB/8ª) Variable
0 ~ +10dB
01
>90dB
35Hz ~ 55Hz
3000W RMS
79%
10K Ohms
0.22V ~ 4V
Output short-circuit, low/high supply voltage and
16VDC
9VDC
2.40A
150A
300A
8.98" x 2.76" x 9.37"
Thermal protection
5.72lb
fc=10K
*Rated power with 40Hz and 1KHz sinusoidal signal, THD <= 1%, with resistive loads, measured with SMD/AD-1 audio power analyzer or
equivalent and the product at lower than 50°C case temperature and 12,6V supply voltage.
The values as above are typical and may vary, due to electronic components tolerance or manufacturing process.
For further informations or questions, visit our website or contact TARAMPS ELECTRONICS support.
ENGLISH
Summary of Contents for SMART 3
Page 1: ......
Page 14: ...MN_010506_R00...
