Index
08
•Tamper or torn warranty seal;
•Costs involving uninstallation, reinstallation of equipment as well as shipment to the factory;
•Damaged products by improper installation, water infiltration, violation by unauthorized individuals;
•Defects caused by accessories, modifications or features attached to the product;
•Cases in which the product is not used in adequate conditions;
•The product with damage from falling, bumps or nature related problems (flooding, lightning, etc.);
TARAMPS, located on Abilio Daguano Street 274, Res. Manoel Martins – Alfredo Marcondes, SP - Brazil, ZIP
CODE 19180-000, guarantees this product against any defects on terms of project, making, assembling, and/or
with solidarity, due to project vices which cause it improper or inadequate to its original use within 12 months
from the date of purchase. In case of defect during the warranty period, TARAMPS responsibility is limited to the
repairing or substitution of the device of its own making.
This warranty excludes:
•Damage of any kind, due to problems in the product, as well as losses caused by discontinued use of the
product.
•Warranty card is not properly filled or torn;
Term of warranty
•Technical assistance
07 •
Term of warranty
•
The Big Boss
line presentation
•
Smart line presentation
08 •
Introduction
•
Key recommendations
•
LEDs indicators & protection system
11•
Installation
•
Recommended wire gauge & fuse
09 •
Functions, inputs & outputs
10 •
Power supply connector
12 •
Technical features
ENGLISH
Technical assistance
Phones: +55 18 3266-4050 / +55 18 99749-3391
E-mail:
For international support, check on our website:
www.taramps.com.br/en/rede-de-assistencias-tecnicas
or contact direct the factory support:
The Big Boss Line Presentation
Multi-impedance:
Featuring new control technology and new functions, the The Big Boss 3 Bass has
3000W RMS rated power in the range of 0.5 to 2 Ohms: (0.5 - 1 - 1.33 - 1.5 - 1.67 and 2 Ohms with same
power);
SMART LEDS:
LEDs output signal level indicator on top of product;
Power connector for cables up to 1/0 AWG:
Allows the use of power cables with larger gauge (up to
50mm²) for higher performance;
RCA input for up to 4V RMS:
Input gain adjustment that allows head units up to 4V RMS output level;
Dual RCA IN / OUT Input:
RCA connector with input and output function, eliminates the needing of “Y”
cables for send the same unput signal to another amplifier;
AUTO-Restart Protections:
The amplifier automatically restarts after a protection event;
RAMP audio initialization:
After turning on the amplifier, audio is released gradually (ramp).
