Technical features
Taramps reserves the right to modify the contents of this manual without prior notice and not to apply the
modifications to units previously produced.
The values mentioned are typical and may change due to the tolerance of components or the manufacturing process.
** Protection system on page 07.
* Nominal power with 1KHz sinusoidal signal and 4 ohms resistive load. (Measured according to ABNT NBR IEC 60268-3
sound equipment, Part 3: Amplifiers).
For more information or questions visit our website or contact TARAMPS support.
RMS Power:__________________________________
Nominal RMS Power of each channel:______________
MIC Sensitivity:__________________________
AUX input Sensitivity:______________________
MIC input impedance:______________________
Total Harmonic Distortion + Noise (THD + N) at the
nominal power of each channel (100W)____________
TARAMPS THS 6000:___________________________
RMS output voltage for each channel:_____________
Each channel nominal Impedance:_______________
Number of Channels:__________________________
Crossover
___________________________________
Low (bass):______________________________
Mid (mid bass):____________________________
Frequency response (equalizers at 0dB):________
AUX input impedance:______________________
Typical 3-way equalizer performance:
:
High (high):______________________________
FM frequencies:_______________________________
Weight:_____________________________________
Power Supply:________________________________
Protection System:________________________
Ratio signal/noise:_____________________________
Consumption in Stand by:_______________________
HPF (High Pass Filter):___________________________
Dimensions:_________________________________
Maximum consumption:_______________________
LPF (Low Pass Filter):__________________________
Internal protection fuse:________________________
Output protection against short-circuit and low
impedance**
3.5W
±12dB - 2KHz
100Hz (-12dB/8ª) Fixed
±12dB - 10KHz
100Hz (-12dB/8ª) Fixed
87.5 MHz a 108MHz
2.20Kg
( 4.84lb)
6A
398 x 59 x 194mm
(15.67" x 2.32" x 7.64")
508W
90 ~ 140V AC or 190 ~ 240V AC
>70db
Receiver Multi Channel Classe D
04
400W (4 X 100W)
ABNT NBR IEC 60268-3*
100W / 200W BRIDGED
<3%
2 Ohms / 4 Ohms Bridged
10 mV
14.2Vrms / 28.4Vrms Bridged
200 mV
15Hz ~ 20KHz (-3db)
±12dB - 80Hz
5K Ohms
2.2K Ohms
12
