2 -
Check carefully the polarity of power supply wiring (battery's positive and negative
terminals) loudspeakers and the minimum speaker impedance;
You can find below some key recommendations to get the maximum performance of your
amplifier:
1-
Read this instruction manual carefully before carrying out any connection;
Any connection to the amplifier input or output must be carried out when amplifier is
off;
3 -
It is compulsory to install fuses to protect against overloading. The fuse or circuit breaker
must be installed as close as possible to the battery and sized up according to the amplifier;
5 -
The amplifier must be installed in a firm and ventilated area;
4 -
The gauge of power supply wiring is extremely important both to reach the desired
amplifier power and to the amplifier's safety. Use the wire gauge recommended in this
manual (page 11). Using wire gauges below the specified value will result in power loss and
overheating of cables. It is important that the power supply cables are the shortest lenght as
possible;
6 -
In order to avoid interferences, the signal cable (RCA) must be installed away from the
vehicle’s wire harness or from any other power supply cable;
7 -
The amplifier must be installed by a qualified professional.
Taramps reserves the right to modify the contents of this document at any time without prior notice and does
not have the obligation to apply the changes in units which were previously produced.
It was developed in a modern laboratory and with the latest technology.
This manual covers all features, operations and instructions to solve any doubt that may arise
during the installation. Please take some time to read it carefully in order to ensure the proper
installation and the use of all benefits that this product can offer.
For questions, please call
+55 (18) 3266-4050
or visit
www.taramps.com.br
.
Congratulations on your purchase of a Taramps product.
08
Key recommendations
Introduction
Presentation Trio line:
The trio line is a product intended to use with two or three ways acoustic box, using a single
amplifier.
Versatile due to three output ways, suitable to drive the bass loudspeakers, horns and
tweeters in a same amplifier, but with separated level adjusts for LOW, MID and HIGH signals,
and also an audio limiter included.
It makes the instalation easier and pratical, due to less signal and power cables required.
Summary of Contents for 400 TRIO
Page 1: ......
