Functions & inputs
09
5 - INPUT (RCA):
Inputs of signals to be amplified. Connect these signals to RCA outputs of
head unit, using good quality shielded cables to avoid noise interference.
Attention: Using this connector, the connection of the REMOTE cable is NOT require, because
amplifier has an audio recognition system which turn on the amplifier automatically.
6 - INPUT FOR SIGNALS (HIGH LEVEL):
Signal input connectors (L/R) to be amplified.
Connect them to the amplified output connections (WIRES) from head unit.
In order to keep the amplifier ON, a minimum volume is required, around 2 to 5 (varying
according to song or head unit model). Notice that in case head unit is turned on with
volume = 0, the amplifier won’t turn on.
In cause of absence of audio or turning head unit off, the amplifier will still remain on for
around 30 seconds.
1-
LED ON:
Indicates that the amplifier is on.
2 - LOW LEVEL:
Adjusts the signal level of the LOW OUT.
3 - MID LEVEL:
Adjusts the signal level of the MID OUT.
4 - HIGH LEVEL:
Adjusts the signal level of the HIGH OUT.
HIGH
LEVEL
MAX
MIN
LOW
LEVEL
MAX
MIN
MID
LEVEL
MAX
MIN
HIGH INPUT
AUTOMATIC REMOTE
L
R
INPUT
ON
6
5
4
3
2
1
Summary of Contents for 400 TRIO
Page 1: ......
