Step 1: Find link hole at back of unit
Step 2: Using one end of safety chain, drop
number of desired links into link hole.
Once chain is in place check to ensure it is
secure and cannot be pulled back through
link hole.
Step 3: Take the loose end of the chain
and secure it to the Brush Cutter.
Step 4: Pull chain back to Brush Cutter
placing this end of the chain into the link
hole. Make sure this end of the chain is
secure and cannot be pulled back
through the link hole. After following
these steps to ensure the safety chain is
properly connected. You may now
proceed to connect skid steer to the
Brush Cutter.
