Tar River SRB-870, Owner'S Manual

Page: 27 / 70

27
Mini Round Baler SRB - 870
Maintenance
Maintenance Schedule:
Safety:
•
Any maintenance is to be done with tractor engine off, baler not running.
•
Wear protective gear when servicing the machine, gloves, eye protection, etc.
•
It is best to perform maintenance with the machine on level ground.
Refer to pages 29 - 30 for lubrication points.
Interval
Action required As needed Prior to each
use
100 Hrs. or Sea-
sonal
Specifications
Lubrication
Gearbox Replace oil X Gear oil: SAE 90
Binding Arm Gearbox Replace oil X Gear oil: SAE 90
Note: Gearbox must
be removed to service.
Hydraulic Pump Replace oil X 15W40, 1.8 qt.
Drive shaft Grease X X No. 3 grease
Binding arms and base Grease X X No. 3 grease
Actuator Arm Grease X X No. 3 grease
Link & Tension Arm Pivots Lubricate X X Penetrating chain/
cable spray lubricant
Rear Door Pivot Lubricate X X Penetrating chain/
cable spray lubricant
Roller Chains Lubricate
X X
Penetrating chain/
cable spray lubricant
PTO Lubricate
X X
Penetrating chain/
cable spray lubricant
General Maintenance
Hardware Inspect X X Tighten loose hard-
ware to proper torque
values
Roller Chains Inspect X X Tighten/replace as
necessary
Shear Bolt Inspect Replace as needed
Check air pressure, tires Inspect for correct PSI
X X
Max. 28 psi
Electrical Wiring Inspect
X
Repair/replace
Cleaning X Remove dirt and de-
bris