Tar River Greenscape 750, Operator'S Manual

Page: 5 / 38

5
Greenscape 750 Food Plotter No Till Drill
Thank you for purchasing your Greenscape Food Plotter No
-
Till Drill. The Greenscape Food Plotter
No
-
Till Drill is the latest in the Greenscape family of the most reliable seeders produced in the US over the
past 20 years. High precision seed boxes and flow control make seeding a breeze with the ability to drill many
different varieties and sizes of seed into all types of planting conditions. Heavy built, but constructed to be able
to be handled by tractors as low as 50 HP, the Greenscape Food Plotter No
-
Till Drill is designed for planting
deer food plots around woodlands or high precision pasture seeding in the fall.
The 10 coulters at 7 1/2” high precision large seed seedcups accurately drop seeds into the openings. A
separate Legume seedbox with high precision seed cups accurately drop seed along a “ splash pan ” that rains
the small seed over the soil. A packer roller system with Nylon rings or optional Cast Iron rollers help press
the seed into the ground and close up the cuts made by the disc openers.
Technical Specifications
•
Three Point Hitch Cat. 1&2
•
Heavy tubular frame construction
•
All ground driven, no PTO shaft or gear
-
box to maintain
•
Precise seed metering cups with individual clean out gates
•
Rear roller packer rings to firm and smooth seedbed
•
Water tight seed box with agitator shaft
-
calibration chart and seeding rate chart
•
10 Cast Iron double disc openers spaced at 7.5”
•
Spring loaded coulters to cut through tough ground
•
Optional Cast Iron roller rollers
Greenscape 750 Food Plotter No Till Drill
Weight 1840 lbs.
Req. HP Minimum 50 HP
Cat. hitch 1 & 2
Double disc openers 10
Row spacing 7 1/2”
Hopper Capacity cu. ft.
-
front 10.00
Hopper Capacity cu. ft.
-
rear 2.00
Introduction