9
805-0039C Rev F
C.
Remove O-Ring retainer by tilting the handle upside down,
Fig.13
. If retainer(s)
does not fall out, carefully lift the clear retainer straight up by lightly applying
outwards pressure with your fingers on the tabs of the retainer, see
Fig. 14
, and
slowly guide up through the plunger stem(s). Inspect retainer for wear or cracks
replace if damaged.
Fig.13
Fig.14
D.
Using the O-ring tool, PN 316-0028, carefully remove the O-ring(s) that need to be replaced,
Fig. 15
.
Be careful not to
damage the O-ring gland as this may lead to leaks.
Fig. 15
NOTE:
During removal, retainer(s) should have little to no resistance when guided evenly off the
surface of the handle. The plunger stems will restrict the movement of the retainer if angled
too much.
Summary of Contents for Rattler II
