4.
ACCESSORIES
IOM manual Tapflo PTL Hose pumps
37
4.
ACCESSORIES
4.1.
Pump trolleys
If the hose pump is required to be a mobile device, a range of industrial
trolleys are available. They are designed to enable mobility but also
stable and easy operation of the delivered devices. Thanks to the trolleys
the pumps can be easily transported and used in many applications and
locations. Because some of the pump are pretty big, the trolleys are
available for
PTL17, PTL25, PTL30
and
PTL45
pumps. The trolleys are
made of sandblasted AISI 304 stainless steel. A variety of options is also
available, including: ATEX, ON/OFF switch, built-on frequency inverter,
supply cable with 3-phase plug.
For more details see the “Mobile Pump Solutions” nfo letter under this
4.2.
Frequency inverters
The frequency inverters are used regulate the motor speed and therefore the capacity of the pump. They can
be purchased as standalone units to be installed separately of the pump or pre-installed in a cabinet including
a control system or built on a trolley.
For more details see the “Frequency inverters” nfo letter under this
4.3.
Hose leak detector
The rupture of the hose, which is a wearing part, creates a
leakage of the pumped liquid. Hose detectors make it possible
to detect these leakages and stop the pump upon hose rupture.
The system is based on a capacitive sensor and is available for
all pump sizes. Apart from the sensor itself, it includes a
threaded reduction and a connection cable of desired length.
For more details see the “Hose Leak Detectors” nfo letter under
this
Summary of Contents for PTL Series
Page 63: ......
