0. GENERAL
IOM manual CTM mag drive pumps
4
0.
GENERAL
0.1.
Introduction
CTM is a compact and reliable magnetically driven centrifugal pump made in PP and PVDF.
With proper attention to maintenance, CTM pumps will give efficient and trouble free
operation. This instruction manual will familiarise operators with detailed information about
installing, operating and maintaining the pump.
0.2.
Warning symbols
The following warning symbols are present in this instruction manual. This is what they say:
This symbol stands next to all safety instructions in this instruction manual
where danger to life and limb may occur. Observe these instructions and
proceed with utmost caution in these situations. Inform also other users of all
safety instructions. In addition to the instructions in this instruction manual, the
general safety and accident prevention regulations must be observed.
This signal stands at points in this instruction manual of particular importance
for compliance with regulations and directives, for correct work flow and for the
prevention of damage to and destruction of the complete pump or its
subassemblies.
This symbol indicates possible danger caused by strong magnetic field in the
vicinity of the pump.
This symbol signals possible danger caused by the presence of electric fields or
live wires.
0.3.
Qualification and training of personnel
The personnel in charge of installation, operation and maintenance of the pumps we
produce must be qualified to carry out the operations described in this manual. Tapflo shall
not be held responsible for the training level of personnel and for the fact that they are not
fully aware of the contents of this manual.
