9
(g)
Under no circumstances should a mat
sensor be cut or drilled. It is not possible for
the user to modify the size or shape of a mat
sensor.
(h)
Great care should be taken when handling
mat sensors. Never pick the sensor up or drag
it around using the cables. Never bend a mat
at a radius less than 300mm. Keep mat sensors
flat whenever possible. Always store flat. Mat
sensors with one edge longer than 1 metre
should be handled by two people.
Figure 5 - Ensure operator is always standing on active area of sensor
(i)
After installation the machine/mat system
must be commissioned in accordance with
section 5 of this manual.
(j)
Any covers removed during installation
must be replaced as soon as possible.
SLOPING SKIRT FIXED TO MACHINE
MAT
OPERATOR ON TIPTOE ALWAYS
ON ACTIVE ZONE OF SENSOR
MACHINE