background image

19

Lonely? Looking for that special someone? 

Do you have a question about your TAPCO Mixer?

Please call our Technical Support chaps at 

1-877-827-2669

, Monday to Friday, from 7 am to 5 pm PST.

After hours, visit www.tapcogear.com and look under 

Support

, or e-mail us at [email protected]

Repair

Service for TAPCO mixers is available at a factory-

authorized service center. Service for TAPCO mixers 
living outside the United States can be obtained 
through local dealers or distributors.

If your mixer needs service, follow these instructions:

1.  Review the preceding troubleshooting 

suggestions. Please.

2.  Call Tech Support at 1-877-827-2669, 7 am to 

5 pm PST, to explain the problem and obtain a 
Service Request Number. Have your mixer’s serial 
number ready. 

You must have a Service Request Number before 
you can obtain factory-authorized.

3.  Keep this owner’s manual. We don’t need it to 

repair the mixer.

4.  Pack the mixer in its original package, including 

endcaps and box. This is 

VERY IMPORTANT

. When 

you call for the Service Request Number, please 
let Tech Support know if you need new packaging. 
You can order new packaging through our parts 
department. 

TAPCO is not responsible for any 

damage that occurs due to non-factory packaging.

5.  Include a legible note stating your name, shipping 

address (no P.O. boxes), daytime phone number, 
RA number, and a detailed description of the 
problem, including how we can duplicate it.

6.  Write the Service Request Number in 

BIG PRINT

 on 

top of the box. Units sent to us without the Service 
Request Number will be refused.

7.  Tech Support will tell you where to ship the 

amplifi er for repair. We suggest insurance for all 
forms of cartage.

8.  We’ll try to fi x the mixer within fi ve business days. 

Ask Tech Support for the latest turn-around times 
when you call for your Service Request Number. 
The mixer must be packaged in its original 
packing box, and must have the Service Request 
Number on the box. Once it’s repaired, we’ll ship it 
back the same way in which it was received. This 
paragraph does not necessarily apply to non-
warranty repair.

Note:

 You must have a sales receipt from an Authorized 

TAPCO Dealer to qualify for a warranty repair.

Summary of Contents for Mix 260FX





























Reviews: