5. 48V Indicator
This red LED lights up when the 48V phantom power switch [4] is
engaged.
6. MON LEVEL Control
This adjusts the level of the rear panel MONITOR [11] analog outputs.
It does not affect the headphone output.
Note:
Leave this knob turned down each time you turn on
your system, and then increase it to a safe listening volume.
7. PHONES LEVEL Control
This adjusts the level of the PHONES [8] analog output on the front
panel. It does not affect the MONITOR output.
Note:
Make sure the PHONES LEVEL control is turned all
the way down before plugging in your headphones. This
will protect your hearing and prevent any loud surprises.
8. PHONES Jack
The PHONES jack accepts a 1/4" TRS stereo plug normally used on
headphones. If your headphones have a 1/8" mini-plug, you will need a
1/8" to 1/4" stereo adapter, commonly sold in electronics and audio stores.
The headphone signals are the same as the Monitor Output signals
(unless you have converted to True 6-Output Mode), except the level is
controlled by the PHONES LEVEL control instead of the MON LEVEL
control.
9. POWER Indicator
The Link.FireWire is powered from the FireWire port or the external
AC-to-DC power supply. There is no power switch, so this LED lights up
whenever the Link.FireWire has power.
POWER
2
1
2
8
1
7
5
9
4
3
6
1
3
2
