SPECIFICATIONS
DB-1A
Frequency Response:
100 Hz – 20 kHz (+/– 0.05 dBm)
20 Hz – 20 kHz (+/– 0.80 dBm)
Maximum Input Level:
Pickup:
+8 dBm
Line:
+15 dBm
Speaker:
+35 dBm
Input Impedance:
Pickup:
10M ohm
Line:
10M ohm
Speaker:
11k ohm
Gain:
Pickup:
–8 dBm
Line:
–28 dBm
Speaker:
–48 dBm
Residual Noise:
Pickup:
–106 dBm
Line:
–109 dBm
Speaker:
–109 dBm
Signal-to-Noise Ratio (with 15 dB headroom):
Pickup:
–99 dB
Line:
–109 dB
Speaker:
–89 dB
Rise Time:
1 microsecond, no overshoot
THD + Noise:
0.01%
Output Impedance:
200 ohms
Power Requirements:
48 V phantom power or two 9 V batteries
Battery Life:
300 hours
Current Draw:
< 7 mA DC
Dimensions:
Height:
2.0 in/51 mm
Width:
4.3 in/109 mm
Depth:
4.0 in/102 mm
Weight:
14 oz
Lonely? Looking for that special someone? Do you have a question about
your TAPCO DI Box?
Please call our Technical Support chaps at
1-877-827-2669
, Monday to Friday, from 7 am to 5 pm PST.
After hours, visit www.tapcogear.com and look under
Support
, or e-mail us at [email protected]
DB-1P
Frequency Response:
100 Hz – 20 kHz (+/– 0.05 dBm)
Nominal Input Level:
Inst:
0 dBm
Amp:
0 dBm
Nominal Output Level:
Inst:
–21 dBm
Amp:
-52 dBm
Gain:
Inst:
–21 dBm
Amp:
–52 dBm
Residual Noise:
Inst:
–135 dBm
Amp:
–135 dBm
THD:
0.01%
Dimensions:
Height:
2.0 in/51 mm
Width:
4.3 in/109 mm
Depth:
4.0 in/102 mm
Weight:
12 oz
Disclaimer
Since we are always striving to make our products better by
incorporating new and improved materials, components, and
manufacturing methods, we reserve the right to change these
specifications at any time without notice.
“TAPCO” is a registered trademark of LOUD Technologies Inc.
All other brand names mentioned are trademarks or registered
trademarks of their respective holders, and are hereby
acknowledged.
3
