Tapco Adaptive Alpha Premier, Installation And Maintenance Manual

Page: 6 / 43

1-2 A
LPHA
PID S
IGN
I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
(PN 1260600601 R
EV
. B )
Introduction
E
QUIPMENT PROTECTION
1

Equipment protection
Preventing electrostatic discharge (ESD)
This equipment contains components that may be damaged by “static electricity”, or electrostatic discharge. To prevent this from
happening, be sure to follow the guidelines in Adaptive Display System’s Tech Memo 00-0005, “Preventing Electrostatic Discharge
(ESD) Damage,” available on our Web site at http://www.Adaptivedisplays.com.
EMI compliance
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with installation
guidelines, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference, in which case the user will be required to correct the interference at his own expense.
Memory backup
In the event of power loss, a super capacitor in an Alpha PID sign provides power to the memory on the controller in order to save
messages and time settings.

Supplier's Declaration of Conformity
47 2.1077 Compliance Information
Unique Identifier:
• 1260800101 - ALPHA PID-8RGB 48RX192C SF
• 1260800102 - ALPHA PID-8R PN 1260600601 REV. A GB 48RX192C DF
Party issuing Supplier's Declaration of Conformity
ADAPTIVE Micro Systems LLC
7840 N 86th Street
Milwaukee, WI 53224
USA
http://www.adaptivedisplays.com/
Responsible Party - U.S. Contact Information
ADAPTIVE Micro Systems LLC
7840 N 86th Street
Milwaukee, WI 53224
USA
http://www.adaptivedisplays.com/
FCC Compliance Statement (for products subject to Part 15)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
Thomas Mandler
Adaptive's FCC Compliance Officer
(6/9/2020