background image

11

 12

12-Hour Auto Shut Off

• When the heater has been working for 12 hours continuously 

without any other operation, it will shut off automatically. 

Tip-Over Protection

• When the heater is tipped over, the heater will shut off automatically 

with 10 beeps. 

•  Place the heater back on a flat, level and stable surface and remain 

upright. Then turn it on again.

Overheat Protection

• When the ambient temperature is above 122°F, the heater will 

stop heating and the overheat alarm will be triggered with timer 
indicators (1h, 2h, 4h) flashing and 10 beeps. 

•  Please unplug it from the power source and power it on again when 

the ambient temperature drops below 122°F.

Temperature sensor open / short circuit

• Open circuit: Timer indicator “1h” flashes on the LED display with 10 

beeps.

•  Short circuit: Timer indicator “2h” flashes on the LED display with 10 

beeps.

•  Please unplug it from the power source and contact TaoTronics 

Customer Support.

Replacement of Batteries in 

Remote Control

1.Remove the battery box cover along the indicated arrow direction.

2.Replace with two new #7 (AAA 1.5V) dry batteries. Make sure 

positions for “+” pole and “-” pole are correct.

3.Reinstall the battery box cover.

CAUTION:

• Replace with new batteries of the same type when replacement is 

required.

• When not using the remote control for a long time, please take out 

the batteries.

• Do not attempt to dismantle the batteries.

• Do not dispose the batteries in fire, batteries may explode or leak.

Summary of Contents for TT-HE009














Reviews: