8
pair;
(7)
If the pairing fails, repeat steps 2,3,4.
Advanced applications: network
Currently supports a scanning gun on two receivers network mode (hereinafter
referred to as "1 to 2 mode") or less than or equal to 4 scanners on a receiver network
mode (hereinafter referred to as "4 to 1 mode"). "1 to 2 mode", that is, data scanned by
a scanner can be sent to 2 computers; "4 to 1 mode", that is, up to four scanners
’
scanning data can be sent to a computer. If users have several scan guns and
receivers,network combination can be based on their own needs.
If the user has five scan guns and three receivers, a "4 to 1 mode" and a "1 to 2
model" can be configured, Configuration of "4 to 1 mode" follows these steps:
(1)
Switch on the first scanner;
(2)
implementation of the above "1 on 1 match" process;
(3)
pairing is successful, said the first scanner is in network,called as "1 on 1 mode";
(4)
Switch on the second scanner, the same execution of "1 to 1 match" process,
successful matching shows that the second scanner has access to network,called
as "2 to 1 mode";
(5)
Switch on the third scanner, the same execution of "1 to 1 match" process,
successful matching shows that the third one has access to network,called as "3
to 1 mode";
(6)
Switch on the forth scanner, the same execution of "1 to 1 match" process,
successful matching shows that the forth one has access to network,called as "4
to 1 mode";
Note:
If you only need "2 to 1 mode", then step 4 can be executed. If you need "3 to
1 mode", then perform step 5.
Configuration of "1 to 2 mode" follows these steps:
(1) Switch on the wireless scanning gun;
