TaoTronics TT-AH016, User Manual

Page: 5 / 20

EN
Specifications
Package Contents
Content
Cleaning Brush
Protection Cap
Remote Control
Thank you card
User Manual Number
1
1
1
1
1 Usage
Clean the humidifier
Prevent water entering the air outlet when cleaning the product
--
--
--
Model
Operating Voltage
Power
Water Tank Capacity
Mist Output
TT-AH016
AC 100-240V
35W
4.5 L / 152.2 oz
300 mL / 10.1 oz per hour (High)
200 mL / 6.8 oz per hour (Medium)
120 mL / 4.1 oz per hour (Low)
How To Use
Remove the tank lid and add water (do not exceed the max water level). Pour in 2 to 3
drops of essential oil and place the lid back on. Connect to a power source and the
device will enter standby mode. You will then hear a beep sound and the buttons on the
control panel will light up in red.
Note: When placing the tank lid back on, align the notches on the lid with the bulges on
the tank.
Turn On / Off the Mist
1. Tap the Power Button once to start mist output (default: medium level). The Power Button
will turn green.
2. Tap again to stop output.
Light Adjustment
1. Tap the Light Button to enter color carousel mode, which will automatically cycle through
different color choices.
2. Tap again to stay on the current color. Keep tapping to cycle through different colors.
After cycling through all colors, tapping the Light Button again will return to color
carousel mode.
3. Tap and hold the Light Button for 1.5 seconds to turn off the light.
Timer Setting
1. Tap the Timer Button to set a timer between 1 to 12 hours. The timer on the LED display
will blink three times to confirm your setting.
2. Setting the timer to “00” turns off timer mode. You may tap and hold the Timer Button at
any time to turn it off.
Humidity Setting
1. Tap the Humidity Button to set the humidity level. The humidity will increase by 5% with
each tap. Once set, the humidity level on the LED display will blink three times to confirm
your setting.
01/02
HUMIDIFIER
User Guide
www.taotronics.com