How to Use
Add water
•
Take off the upper lid and water tank lid
•
Connect power adapter
•
Use the included cup to add water to the water tank, do not go beyond 100mL
•
Add 2-3 drops (0.1 – 0.15ml) of aroma oil into the water
•
Put the lids back on
Operation
“LIGHT” button controls LED lighting:
•
Cycle through different lighting modes by pressing the light button. Light LED stays
on when lighting is on
• Long press light button to turn off LED lighting, and the light LED will be off
“MIST” button controls misting mode:
•
Press the mist button will cycle through continuous mode, interval mode and turning off
• Continuous mode will have mist on until power off or when water is running low
•
Interval mode will have the mist cycle between on for 30 seconds and off for 30 seconds
• Mist button LED will be on during continuous mode; it will become flashing when in
interval mode
• When mist is turned off, the mist LED will be off
•
With a full tank, the diffuser can work for 3-5 hours on continuous misting mode or 6-9
hours on interval mode
• When water runs low in the tank, the diffuser will automatically power off for
protection purpose
Important
• Do not pass MAX level when adding water
• Stop using when water runs low
• Do not power on when the upper and tank lid are not properly covered
• Empty the water tank and store the product in dry and shady place when not used
for a long time
Product Diagram
⑩
⑨
①
Upper Lid
④
Drainage Side
②
Light Button
⑤
Water Tank
③
Mist Button
⑥
Air Intake
⑦
Base
⑩
Air Inlet
⑧
DC Socket
⑨
Water Outlet
03/04
