Tao Motor BULL 150 Owner'S Manual Download Page 70

Page: 70 / 80

CLEANING SPARK ARRESTER

1. Unscrew the 3(4mm) allen bolts (#4) securing the muffler end cap to muffler by using a 4mm allen socket wrench.

2. Unscrew the 3 Phillips screws (#5) securing spark arrester to muffler.

3. Carefully remove the spark arrester from the muffler assembly.

4. Remove accumulated carbon on the spark arrestor screen with soap and water and remove hard to remove carbon carefully

with a brass wire brush and then rinse and dry the spark arrestor.

5. Check the spark arrestor for damage, and replace it if necessary.

6. Install the 3 Phillips screws (#5)and tighten them to the specified torque.

7. Install the 3(4mm) allen bolts (#4) securing the muffler end cap to the muffler and tighten them to the specified torque.

Be sure the exhaust pipe and muffler are cool before cleaning the spark arrester.

Tightening Torque: Muffler End Cap:

6.77Nm / 5 ft/lbs

Tightening Torque: Spark Arrestor

Screen: 6.77Nm / 5ft/lbs

1. Muffler Assembly

2. Spark Arrester

3. Muffler End Cab

4. Muffler End Cap Bolts

5. Spark Arrestor Mounting Phillips Screws

Summary of Contents for BULL 150

















































































Search results

Summary of Contents for BULL 150

Reviews:

Related manuals for BULL 150

Brands by name

Popular brands

Tao Motor BULL 150, Owner'S Manual

Search results

Summary of Contents for BULL 150

Reviews:

Related manuals for BULL 150

Brands by name

Popular brands