LANYARD CORD:
The lanyard cord is designed for use by an adult supervising the child operating the ATV. When using the engine
stop switch cord, be sure the speed limiter on the handlebar is adjusted and the engine speed limits the ATV to a
walking speed.
1.
Install the cap on the end of the engine stop switch cord onto the engine shut-off
switch
(
Red
button).
2.
Put your fingers in the loop
a
t the other end of the cord.
3.
As your child is riding, walk behind the ATV, closely watching his or her actions as well
as the path ahead.
4.
If there is a potential hazard ahead or if your child is not riding correctly, pull
firmly
on the cord (lanyard)
to stop the engine. Because the ATV will continue to roll for some distance,
allow extra time and distance to pull the cord before a potentially hazardous situation
might be encountered.
NOTICE
1.
Lanyard Cap
TIP
The ATV will not start without the cap in place.
The lanyard assembly can be attached on the left or right
side of the handlebar.
2
Summary of Contents for Boulder B1
Page 38: ...GETTING TO KNOW YOUR ATV 29 ...
Page 63: ...54 ...
Page 64: ...55 ...
Page 69: ...Find important product information and how to videos on our website www taomotor com ...
