8
16
24
32
40
48
QFlex Range
The joining hardware parts are packed with the QFlex modules in
will be marked ‘HARD
W
ARE’
The Table below shows the list of joining hardware parts and bracketry supplied with each QFlex model.
A
QFlex array will consist of either just a master unit (QFlex 8 or 16) or a master unit with up to three additional slave
units (QFlex 48)
The master unit will always be positioned at the bottom of any speaker column and will be slightly longer to
accommodate the connectors and power indicator.
The top of a slave unit will be the same as the top of the master unit to allow another slave unit to be mechanically
VNET™ command, returning to operating mode either upon the detection of audio or a ‘power up’ VNET™ command.
QFlex products have analog and
AES* audio inputs, and use
V
NET™ for monitoring and control.
For mechanical integrity
, thermal and EMC reasons, the electronics module is in a separate cavity from
the transducers.
QFlex products are designed
to meet the safety requirements of UL60065 7th edition & EN60065 2002.
QFlex meet the EMC requirements of Fcc15a and EN55103*
AES inputs will be included as standard in 2009
Cabinet joining
plate with hinges
7600 1770
QFlex
product
Joining plate - side
(inc 20 screws)
7600 1800
Product
number
Joining plate
- rear
6883 0267
Wall
bracket
8001 5330
QFlex 8
8004 0100
0
0
0
1
QFlex 16
8004 0110
0
0
0
1
QFlex 24
8004 0120
1
1
0
1
QFlex 32
8004 0130
1
1
0
1
QFlex 40
8004 0140
2
2
0
2
QFlex 48
8004 0150
2
3
1
2
Summary of Contents for Qflex
Page 1: ...u s e r m a n u a l...
Page 34: ...Input A muted...
