SECUR – ET VPC
Pole Clamp
SECUR ET – VEB
Eyebolt
Description Quantity
VPC Pole Clamp
1
M10 Washer
1
M10 x 50mm Screw
1
M10 Nyloc Nut (Black)
1
The Tannoy iQ 10C & iQ 10PC loudspeakers can
be flown with high quality VEB M10 eyebolts with
collar to BS4278:1984. The loudspeakers are
equipped with internal steel braces, which also
double as the flying points, and accept VEB M10
eyebolts.
To install the VEB M10 eyebolts remove the
original M10 counter sunk screws from the
locations you wish to install the VEB M10
eyebolts. Then replace these counter sunk M10
screws with the VEB M10 eyebolts. The kelping
brackets on the rear of the cabinet should
only
be used for tilting the loudspeaker to the desired
angle.
Important: It is imperative for safety reasons
that two eyebolts linked to two independently
fixed straps are used per cabinet.
Never attempt to use formed eyebolts i.e.
formed from a steel rod and bent into an eye.
!
!
The VPC pole clamp can be used along with
the iQ10 yoke bracket to suspend the
loudspeaker from an overhead bar, truss or
suitable structure. Only the parts supplied
should be used to secure the VPC to the yoke
bracket.
The following items are included with each
VPC:-
11
Summary of Contents for iQ 10C
