TROUBLESHOOTING AND MAINTENANCE
If you are experiencing problems with this unit, in the first instance please carefully read the
relevant sections of the User Manual and the Troubleshooting section below. If you cannot
solve your problem please contact your supplier for further assistance.
www.tanningessentials.co
PROBLEM
CAUSE
WHAT TO DO
Your unit isn’t
extracting at
full capacity.
Unit isn’t working correctly.
The unit is not turned on.
The filter needs to be changed.
Feel for air from the back of each
unit.
Check each fan unit switch is on
and illuminated blue and make
sure all cords are inserted correctly.
Replace the filter.
The blue light
on the power
switch does
not turn on.
The foot pedal
does not work.
There is a build
up of solution
around the fan
units.
Electricity not turned on.
The fuse needs to be replaced.
Electricity is not turned on.
The fan units need to be
cleaned.
The filter needs to be changed.
Check the power cord is plugged
in correctly.
Change the fuse. This is located on
the side of each fan unit where the
power switch is, above the metal
pronged male plug.
Check each tan unit switch is on
and illuminated blue, and make
sure all cords are inserted
correctly.
Check the power is turned on
at the power outlet.
Clean the unit using warm soapy
water. Approximately once a month
unstack the fan units and clean in
between with warm soapy water.
Replace the filter.
