GB
LO
BATTERY
kg
lb
cm
ft.in
NET
HEIGHT
BMI
BMI MODE
STABILIZED
STEP ON
LO
BATTERY
kg
cm
NET
HEIGHT
BMI
BMI MODE
STABILIZED
STEP ON
kg
NET
STABILIZED
STEP ON
LO
BATTERY
kg
cm
NET
HEIGHT
BMI
BMI MODE
STABILIZED
STEP ON
LO
BATTERY
kg
NET
HEIGHT
BMI
BMI MODE
STABILIZED
STEP ON
ON
ZERO
BMI MODE
SET
BMI MODE
SET
d
d
d
LO
BATTERY
cm
HEIGHT
BMI
BMI MODE
d
d
d
lb
NET
STABILIZED
STEP ON
kg
NET
STABILIZED
STEP ON
kg/lb
d
d
d
d
4. BMI Weighing
1. Turn on the power by pressing the
key.
2. After all the segments flash, [0.0 kg] is displayed.
3. Please push
for at least two seconds.
[0.0
kg
] and the default height [170 cm] will be displayed.
4. Please set your height with the
key.
(this can also be entered after you step on the scale).
The person to be weighed should stand still in the middle of the scale.
The weight will be displayed.
5. Once your height and weight have been established, please press
.
Your weight and BMI figure will be displayed.
* Whenever you press the
key in BMI mode, the scale will switch alternately between BMI
and height (can be changed with the
key) display.
* The display will return to [0.0
kg
] and the default height [170 cm], if you press
after step-
ping off the scale.
BMI MODE
SET
BMI MODE
SET
BMI MODE
SET
BMI MODE
SET
ON
ZERO
5. Changing Measurement Units
This function is used to change the measurement units on the display.
e.g. When changing the unit from kg to lb.
1. Press the
key.
The measure shifts from kg to lb and the measurement units change.
kg/lb
7
Based on NIH/WHO BMI Guidelines
Under Weight
Normal Range
Pre obese
Obese CLASS 1
Obese CLASS 2
Obese CLASS 3
BMI
＜
18.5
18.5
≦
BMI
＜
25
25
≦
BMI
＜
30
30
≦
BMI
＜
35
35
≦
BMI
＜
40
BMI
≧
40
GB
6
LO
BATTERY
kg
lb
cm
ft.in
NET
HEIGHT
BMI
BMI MODE
STABILIZED
STEP ON
kg
NET
STABILIZED
STEP ON
kg
NET
STABILIZED
STEP ON
kg
NET
STABILIZED
STEP ON
ON
ZERO
OFF
d
d
d
d
d
d
d
kg
NET
STABILIZED
STEP ON
kg
NET
STABILIZED
STEP ON
k
g
NET
STABILIZED
STEP ON
k
g
NET
STABILIZED
STEP ON
LO
BATTERY
kg
lb
cm
ft.in
NET
HEIGHT
BMI
BMI MODE
STABILIZED
STEP ON
ON
ZERO
d
d
5. Operation
1. Standard Weighing Procedures
2.Tare Weighing
3.Cancellation of Tare Weighing Function
1. Turn on the power by pressing the
key.
2. After all the segments flash, [0.0 kg] is displayed.
3. The person to be weighed should stand still in the middle of the scale.
The weight will be displayed.
When the weight becomes stable at 2
kg
(4lb) or over, the display is hold.
Hold is reset when you step off the scale and the weight comes to 2
kg
(4lb) or less.
4. Measurement is completed.
When the person steps off the scale, the display will return to [0.0
kg
].
Turn off the power by pressing the
key.
OFF
ON
ZERO
1. Turn on the power by pressing the
key.
2. After all the segments flash, [0.0 kg] is displayed.
3. Carefully place the tare items (clothes, etc.) at the center of the platform.
The weight of the items will be displayed.
4. Press the
key.
An arrow will appear next to the
t
[NET] mark and [0.0
kg
] will be displayed.
5. When weighing an object including tare items, the weight of the object minus that of the tare
items, which is the net weight, will be displayed.
To change the tare weight, cancel the tare weighing function and repeat from step 3.
When using the tare weighing function, the measurement range is reduced by the tare weight.
(Measurement Range) = (Maximum Measurable Weight) - (Tare Weight)
TARE
ON
ZERO
1. Remove the tare items (clothes, etc.) from the tray.
The weight will be displayed as a negative value.
2. Press the
key.
The arrow next to the
t
[NET] will disappear and [0.0
kg
] will be displayed.
TARE
Summary of Contents for WB-100
Page 6: ...GB GB 11 10 ...
